This equipment uses external power traction to convey the wire, allowing it to pass through the cleaning chamber, and adopts an advanced high-efficiency and energy-saving shot blasting machine,

which throws high-speed dense shot streams to strike the wire surface, causing the rust layer, scale, and other contaminants on the wire surface to quickly

quickly detach, exposing surface defects of the wire rod, and obtain a clean surface with a certain roughness, meeting the requirements of the combined drawing unit and flaw detection machine for the wire rod surface. 1.1 Basic Process Conditions 1.1.1 Product Specifications and Annual Production Capacity

Product Specification        DiameterΦ5.5 -Φ20mm    

Maximum Working Speed   60m/min

1.1.2 Product Varieties: Nickel-based alloy steel,Alloy tool steel, Alloy structural steel, Carbon tool steel, Carbon structural steel,

High-speed tool steel, spring steel, bearing steel, stainless steel. Product performance: hot-rolled annealed wire rod   Yield strength: ≤850MPa   Hardness: ≤HB320

1.1.3 Cleanliness of material surface after cleaning: Asa ≥2.5, surface roughness: Ra≤12.5; according to GB6060.5-88 "Shot blasting, sand blasting,

Surface Roughness Comparison Samples shall prevail. No new damage is allowed on the surface of the material after shot blasting.

1.1.4 Noise: ≤85dB (based on 1m away from the equipment), noise shall comply with the "Design Code for Noise Control in Industrial Enterprises" GBJ8F-85.

1.1.5 Dust and noise must meet environmental standards. Indoor dust emission:≤10mg/m³.